What Is Difference Between Bargman 7-Way Connectors 54006-009 and 54006-057

Question

Question:

is there an adapter from the rv 54006-009 to the 54006-057 rv type

asked by: Bob

0

Expert Reply:

The only difference between the Bargman 7-Way, RV-Style Connector w/ 6' Heavy Duty Insulated Cable - Trailer End # 54006-057 and the 7-Way Molded Trailer End with 6' Cable - HD Blue Insulated # 54006-009 is the color coding of the wire inside. The functions of the wires are the exact same so you wouldn't need to use an adapter to go from one style to the other. It would be just a matter of matching the wires by function if needed and not by color.

I've attached the photos of each color coding to assist.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...

Answer 2

The key here is that the functions are in the correct locations. Wire color is going to vary from manufacturer to manufacturer which is why you should always wire by function and use a circuit tester like #PTW2992 or #PTW 2993 when wiring in a…

view full answer...

Answer 3

Hey Bob, great question. It was about 7 degrees here in Missouri this morning, so I can relate to the cold. I do have a good solution for this too. What I would do is replace your current 7-way cord with the Curt Cold Weather 7-Way RV Style Connector…

view full answer...

Answer 4

The difference between the Bargman 7-Way, RV-Style Connector w/ 6' Heavy Duty Insulated Cable - Trailer End #54006-057 and the 7-Way Molded Trailer End with 6' Cable - HD Blue Insulated #54006-009 is how the wires are color coded. The…

view full answer...

Answer 5

When wiring a trailer connector, it is best to wire by function, as wire colors can vary. We have an excellent wiring diagram on our website, I will provide you a link so you can look at it. If you are looking at the inside of the trailer connector…

view full answer...

Answer 6

Hey Joanne, I think I've found what you're looking for with the Surehoof Ribbed Rubber Trailer Mat #4872SM. This measures 48" x 72" which I would think is enough to cover your ramp and help your horse feel a little more comfortable…

view full answer...

Answer 7

Hey Matthew, so we have a hitch that fits your 2011 Mini Countryman like with the Curt #C11333 but the hitch part number you referenced does not fit your vehicle.

view full answer...

Answer 8

For a 3500 lb Electric Jack, I recommend the Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 3,500 lbs - Black #BD500187. This jack uses a 12 volt system, so it is compatible with your 7-way although a battery is always a…

view full answer...

Answer 9

Although we do not have a premade kit I can help you put the parts together. As long as you have slack in the wire it will allow you to still use the folding tongue. You also need to find your axle capacity and possibly bearing combination since you…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

What Is Difference Between Bargman 7-Way Connectors 54006-009 and 54006-057

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching