Assembly Instructions for Thule T2 Pro XTR 2 Bike Rack # TH83JV

Question

Question:

assembly instructions?

asked by: Loretta

0

Expert Reply:

I have attached the complete instructions manual for the Thule T2 Pro XTR 2 Bike Platform Rack # TH83JV below which details both the assembly instructions and the correct bike loading process. Most of the rack comes pre-assembled and it's really just a matter of putting together a few of the components out of the box.

I have attached a short video demonstration on the Thule T2 Pro that you can also check out.

expert reply by: Chris R

0

click to enlarge

Lorrie

7/18/2020

the hitch lock does not turn to a lock position, it stays in a unlocked position - when jiggling the key the lock will come out about an 8th of an inch then it is locked - cannot pull the lock out my concern is will the lock fall out during driving....is the key to go in a locked position or an unlocked

Reply

Chris R.

7/22/2020

The locking mechanism on the anti-rattle knob shouldn't give you that much trouble. Make sure there isn't any debris inside the lock core - you might even spray some WD-40 into the opening to try and lubricate it a bit. Let me know if this doesn't improve anything.

Reply

Gamal K.

11/10/2020

@ChrisR good morning sir. Do you guys sell all the hardware to put this rack together? We took ours apart completely. When we moved we lost all the screws/bolts and the keys that went with this product. I pretty much need everything that was in the box to put everything together.

Reply

Jon G.

11/11/2020

@GamalK For tools you need the 4mm Hex Key # 853-2430-02 and the M5 Ball Head Hex Key # 853-7302. Then for hardware you need 10 of the self-tapping screw # 8528100001, 2 of the M6 washer # 951061254, and then 8 of both the M8 Button Head Screw # 853597604 and corresponding washer # 951081654. For keys you'll need to see what number is on the face of your lock cores to get one that matches. Let me know what you find.

Reply

Answer 1

What sets the EcoHitch #306-X7391 receiver apart from the other two options is that it's going to be completely hidden behind your bumper. The only portion that is visible is the 2 inch square receiver. So, if looks are important to you, this is…

view full answer...

Answer 2

We offer two primary types of hitch for your 2020 Subaru Ascent. One installs so that the receiver tube sits up against the underside of he back bumper fascia with most of the hitch being visible from the rear of the vehicle. The other type would…

view full answer...

Answer 3

You'll have to measure to be sure if the Thule T2 Pro XTR part #TH83JV has the clearance to fit your Lazy Daze RV. This rack has a distance of 7 inches from the center of the hitch pin hole to the nearest portion of the rack that might interfere…

view full answer...

Answer 4

The serial number for your Thule Summit Cargo Box per Thule will be engraved underneath the lid near the front of the lid. We do not have any reverse mounting hardware that will enable the lid to open from any side besides the normal left side. I…

view full answer...

Answer 5

Yes, it will! The etrailer Hitch item #e93ZR has been confirmed to fit the 2023 Nissan Rogue. It is a class III hitch with a 2" receiver so it will work great with the Thule T2 Pro XTR Bike Rack item #TH83JV. If you max out the capacity on the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Mark, that's a great question. In general you don't have to use a taillight kit like the part #TH24SA with bike racks like the Thule Verse #TH64SA as they are narrow enough that your taillights can easily be seen to the outsides of the…

view full answer...

Answer 8

Hey Al, yes we do have a way to easily add wheels to the Thule Verse bike rack with the part #TH97SA. This will make transporting the rack in and out of your garage much easier.

view full answer...

Answer 9

Hey Ken, thanks for reaching out! The Hollywood Racks RV Rider Bike Rack #HLY64FR is going to be your best bet. It weighs in at 63.5 lbs and can carry up to 2 e-bikes at 80 lbs each. The only issue is if your bikes really do weigh over 80 lbs each…

view full answer...

Answer 10

Hey Steven, thanks for reaching out! The Hollywood Racks TRS SE Bike Rack for 2 Bikes #HR3500 is a pretty standard bike rack, and that includes the size. When it's folded up, that helps with the clearance at the back of your vehicle, but it's…

view full answer...

Answer 11

I have two great options for you. The first is the Swagman E-Spec Electric Bike Rack #S94FR. It's super heavy-duty and has a weight capacity of 70lbs per bike. If you fold down the arm and take your bikes off, there is enough clearance to access…

view full answer...

Answer 12

While the Thule T2 Pro XTR Bike Rack #TH83JV is a great bike rack, since your Scott e-bikes have the front fenders you'll either need to remove them to use the rack or we'll need to look into another bike rack. The reason why it isn't…

view full answer...

Assembly Instructions for Thule T2 Pro XTR 2 Bike Rack # TH83JV

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching