Replacement Shroud and Roof Vent Recommendation for a Coleman Mach 6727-731 AC Unit

Question

Question:

The model number on my rig’s Coleman Mach AC is 6727-731. I need to replace the exterior shroud as it’s about to fly off only the rear two bolts holding it on. Do you carry replacement shrouds to fit this and the bolts needed? I’ve tried to find the strange “L” shaped bolts everywhere locally but no one has them. Second question is, I eventually want to remove this AC and install another vent fan in it’s place Fan-tastic or MaxAir is there a particular make/model of vent fan you would recommend for this application? My two main criteria are 1 Low exterior profile, and 2 reversible airflow. Thanks for your time and consideration!

asked by: Catherine

0

Expert Reply:

The only replacement shroud that will work with your Coleman Mach AC is 6727-731 that we have to offer is the MaxxAir TuffMaxx Replacement Shroud # MA00-325001. This is compatible with Coleman-Mach Mach 1, Mach 3 and Mach 15 models. It comes with washers and nuts to mount it but unfortunately it doesn't come with the "L" shaped bolts that you mentioned.

If you are looking for a lower profile vent to replace your current AC unit then you want to go with a MaxxAir vent as they sit lower than the Fan-Tastic vents. Out of the MaxxAir options we have the MaxxFan Plus Roof Vent # MA00-04500K which features a power lift, the reversible air flow, and sits 3-3/4" tall when closed but 12-1/2" tall when fully opened. We also carry the MaxxFan Deluxe which sits 5" tall when closed but only 9-5/16" tall when fully opened. It not only has the reversible fan function but it also includes a built-in rain shield and is available with a manual lift # MA00-06200K or powered lift # MA00-07500K.

Attached are some review videos for you to check out as well.

expert reply by: Jon G

0

click to enlarge

Answer 1

Correct, the Replacement RV Air Conditioner Cover for MaxxAir TuffMaxx Units #MA00-325001 you're looking at will work with your Coleman AC. This shroud measures 41-5/8" long x 29-3/8" wide x 12-3/4" tall, so it'll have plenty…

view full answer...

Answer 2

The the MaxxAir shroud part #MA00-325001 is a fit for the Coleman Mach, Mach 1, Mach 3 and Mach 15 models and mounts like the original and includes mounting hardware and instructions. Mach is an entire model line of Coleman air conditioners and Mach…

view full answer...

Answer 3

Yes the Maxxair replacement shroud part #MA00-325001 does fit your Coleman Mach 8330-714.

view full answer...

Answer 4

I do have an option for you but the factory tail lights on an older Jayco Eagle Pop-Up wraparound to the outside of the trailer and none of the aftermarket replacement will have this feature. That said, you could pretty easily replace them with some…

view full answer...

Answer 5

I do have an option for you but the wraparound style taillights on a 2000 Jayco Eagle Camper are no longer available therefore your only options for replacement are changing to a different style like the Low Profile LED RV Tail Light part #RVSTLB60…

view full answer...

Answer 6

I do have a solution, but unfortunately the backing plate with the license plate holder is not available as a replacement part. The only option is to replace the light completely with the #RVSTLB61 .

view full answer...

Answer 7

The only way will be to replace the entire assembly as the rear back plate is not available by itself. For that you'd need the part #RVSTLB61. The great news is that the price for this is very reasonable and you get an all new assembly.

view full answer...

Answer 8

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the correct fit for your 7300 series RVP. The shroud is 37 inches by 25 by 13-1/2 inches. If you don't want the two piece unit…

view full answer...

Answer 12

Hello John; with that part number it sounds like you have the Coleman-Mach 7330-714. The correct replacement shroud would be the #MA00-325001. Take a look at the measurements in the diagrams below and compare that to what you have now to see if it…

view full answer...

Replacement Shroud and Roof Vent Recommendation for a Coleman Mach 6727-731 AC Unit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching