What is the Towing Capacity of a 2005 Toyota 4Runner
Question:
Hello, The factor says my towing max is 5,000 but your hitches say 6,000. Im wondering why the difference?
asked by: Eric
Expert Reply:
The aftermarket trailer hitch receivers we carry like the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75155 for your 2005 Toyota 4Runner are almost always going to exceed the capacity of the tow vehicle. However, the lower of the two figures which in this case is the vehicle will need to be the one you abide by. Therefore, your 4Runner with the Max-Frame will have a maximum towing capacity of 5,000 lbs.
If you will be anywhere near the 5,000 lb towing capacity of your vehicle then odds are the trailer has brakes. If the trailer has brakes and you do not already have a brake controller and wiring harness you will need a 4-way, 4 to 7-way adapter, and a brake controller.
For a 4-way wiring harness I recommend the Upgraded Circuit Protected Tail Light Converter part # 119178KIT which comes with a circuit tester that will be needed to install the harness. Then for a 4 to 7-way adapter I recommend the Universal Installation Kit for Trailer Brake Controller part # ETBC7 because it comes with all of the other components you need to install a brake controller like the Tekonsha Primus IQ Trailer Brake Controller part # TK90160.

Products Referenced in This Question
Tekonsha Tail Light Converter with 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 1-1/2 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Tekonsha Primus IQ Trailer Brake Controller - Up to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 3 Axles
- LED Display
- Up to 90 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 600 lbs TW
- 6000 lbs GTW
- 7300 lbs WD GTW
- 2 Inch Hitch
- 730 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Trailer Hitch Recommendation for 2004 Toyota 4Runner that is Compatible with Weight Distribution
- Q&A: Should a Friction Sway Control Bar Be Installed on the Right or the Left Side of a Trailer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Hitch Installation Tips
- Q&A: Can 2008 Toyota 4Runner Tow 4,000 Pound TrailManor Travel Trailer
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended Brake Controller and Plug In Adapter for a 2024 Toyota 4Runner w/the Factory Tow Package
- Q&A: Differences between Class III and Class IV Hitches
- Q&A: Will Factory 7-Way Harness of 2003 Toyota 4Runner Reach Mounting Bracket of Draw Tite Hitch
- Article: Which Hitches are Made in the USA
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Article: Determining Trailer Tongue Weight