Install Instructions for Alpena FlexLED Light Strip

Question:

How can you remove the ground wire from the button

asked by: Eli

Expert Reply:

I attached a picture that shows the install instructions for the Alpena FlexLED # ALP77426 that you referenced which also shows how to remove it from the demo battery and switch.

expert reply by: Jameson C

click to enlarge

Steve N.

2/3/2020

I would like to install you white/clear lights using a USB adapter from you EZ link extension kit straight in to a USB port. Do you have an adapter USB to your four pin extension. If not I see four wires on the extension what pair would I see black light gray dark gray black use to my USB plug. The outlet I will be using will supply 12volts dc. Thanks Steve Newcomer please reply to my email with a suggestion or answer

Jason S.

2/4/2020

For your white lights we have the Bright Ideas 18" Surface Mount LED Starter Strip Light - Warm White - 12V # 277-000169 and the Bright Ideas 18" Surface Mount LED Strip Light - Warm White - 12V # 277-000166. These lights require 12v power which will require a separate wire from your vehicle than the 4-way offers. To get that 12v power, you will need to add the Roadmaster Battery Charge Line Kit for Motorhomes # RM-156-75 to the vehicle side and then use either a 5 way, 6-way, or 7-way plug to gain the additional power wire. I recommend using the Adapter 4-Pole to 7-Pole and 4-Pole # 37185 and add that charge wire to the black wire on the adapter. You will then use the corresponding pin to send the power through your trailer connection to the trailer battery. From there you can add your usb ports if desired. We don't have any male USB adapters, but you could then use the USB Outlet with Waterproof Cap - 2 USB Ports - Black # DG61USBVP if desired on the trailer side.