Running Light Fuse Location 2018 Chevrolet Silverado 2500

Question

Question:

What fuse in truck will it be if there is no power to trailer running lights

asked by: Gary

1

Helpful Expert Reply:

The number 15 fuse in the engine bay fuse box is responsible for the trailer parking lamps. For future reference, the owner's manual will tell you where all the fuses are located and what they do.

expert reply by: Conner L

1

Answer 1

The trailer running light fuse of your 2018 Chevy Silverado is in the number 15 slot of the fuse box under the hood of your truck. I attached a picture with the location pointed out.

view full answer...

Answer 2

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 3

Trailer weight distribution hitches (WDH) such as the Curt TruTrack systems #C17499 and #C17500 do come in varying weight capacities. Selection of the correct one for any given towing setup is based on the actual fully-loaded tongue weight (TW). It…

view full answer...

Answer 4

The 4-way on your trailer is what's known as a wishbone connector like part #A35W42B. Two of the wires are the running light circuit which is a little easier to install since you can run one down each side of the trailer. This way you don't…

view full answer...

Answer 5

The current hitch you have on your 2018 Chevy Silverado 1500 has the towing capacity needed for the trailer you are planning on towing so there would be no need to upgrade it. For a weight distribution system the Reese Strait Line part #RP66084 would…

view full answer...

Answer 6

I can certainly help you re-wire your trailer-side 7-Way connector. Thanks for the photo of your connector, it helped verify the style connector and which wires you have! The attached wiring diagram will help you in attaching the wires back to your…

view full answer...

Answer 7

According to my research the following wires for the 7-Way on your 2019 Chevy Silverado 2500 should carry the following functions: Green OR White/Green - Reverse White - Ground Blue - Brake Controller Green OR Green/Purple - Right Turn/Stop Red/Black…

view full answer...

Answer 8

Lets begin with the non-functional trailer running lamp circuit. I'd suspect a fuse in the engine compartment fuse block in location #15. Replace the fuse but before plugging the trailer back in, you'll want to closely examine the running…

view full answer...

Answer 9

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Tom! The MORryde Cushioned 5th Wheel Pin Box is an awesome system and will greatly improve your towing experience. Based on the sticker you have a Lippert 1621 pin box. Also, thank you for providing the GVWR of your 2018 Heartland Pioneer PI287…

view full answer...

Answer 12

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Running Light Fuse Location 2018 Chevrolet Silverado 2500

Product Page this Question was Asked From

Continue Researching