Comparing Curt and Draw-Tite Trailer Hitches for a 2015 Honda Odyssey
Question:
DT 75270 versus Curt C13068 Mounting Hardware I have been debating between the two subject hitches for my 2015 Honda Odyssey. I actually was about to purchase the Curt option, but started watching your installation videos and looking closely under the Odyssey at the threaded hole locations. The DT comes with 6 spacers Ive already read about and am OK with the Curt even though it lacks using the last 2 OEM holes in the front and 6 washers where the Curt just has 6 washers. Looking at the Odyssey frame, immediately next to where the hole locations are for bolting the hitch is two brackets coming down and are welded to the frame rails - very close proximity. The spacer plates with the DT option I think are allowing the hitch to be above the thickness of those brackets so it can clamp up flat. If either hitch were perfectly sized it might clear the brackets on the outer portion of the frame rail - but considering the manufacturing method of both - Im guessing it would be a decent chance either one will end up over the top of that bracket hence the spacer on the DT. Why isnt Curt also shipping their hitch with those spacers??? Ive read some of the reviews where customers are told to bolt the Curt hitch over that bracket...no way that is a good idea. Im guessin the washer is not thick enough and the washer hole too centered - likely the washer will get caught up on the edge of that bracket. I really like the Curt lower profile/more ground clearance and better overall appearance - however I trust the DT mounting and like the additional robust of the 6 bolt mounting matching OEM. Can you provide any additional explanation to the Curt mounting? Besides saying the Curt will just clamping and mash down the bracket material when torqued down - that seems very risky of bolts loosening over time. I need to order one of the two hitches from you and am struggling with this decision as you can see...thanks for any help you can provide -
asked by: Erik L
Helpful Expert Reply:
Curt decided not to design hitch # C13068 to account for those welded on pieces you referenced in order to maximize the size of the side hitch brackets. As to why they chose to go with a 5 bolt design I can't say. The Draw-Tite hitch # 75270 sounds like it is what you would like more since it accounts for those welded on pieces and attaches in 6 places.
If it were me I would go with Draw-Tite hitch # 76025 for the 2015 Honda Odyssey because with it only the receiver is visible. Installation takes a little longer than the other options but it isn't any more difficult. I have linked a video showing an example installation for you.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
And for a trailer wiring harness you can use # 118521 to add a 4-Way flat connector to the rear of the vehicle. I have linked a video showing how it installs as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- Two Balls
- 1-7/8 Inch Ball
- 2 Inch Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: Blue Ox Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Video: Setting up the Draw-Tite Max-Frame Trailer Hitch Receiver on your 2011 Honda Odyssey
- Q&A: Differences Between etrailer e98852 and Draw-Tite 75662 Class III Hitches for 2019 Ram 1500 Classic
- Q&A: Comparison of Curt Hitch # C13119 and Draw-Tite Hitch # 75742 on 2013 Honda CRV
- Q&A: Choosing Correct Hitch Tongue Weight Capacity for Using a 4-Bike Platform Bike Rack on Honda CR-V
- Q&A: Does Tongue Weight Capacity Get Reduced if Carrying Bike Rack
- Q&A: What is the Tongue Weight Capacity of a 2012 or 2013 Honda Odyssey
- Video: Mount: Curt Trailer Hitch Receiver on a 2019 Ram 1500 Classic
- Shop: Trailer Wiring
- Q&A: Recommended Suspension Enhancement To Haul A 350lb Wheelchair On The Back Of A 2007 Honda Odyssey
- Q&A: Curt vs. Draw-Tite Trailer Hitch Comparison for a 2016 Subaru Outback Wagon
- Article: Trailer Wiring Diagrams
- Video: Hopkins 4-Pole Flat Plug-In Simple Vehicle Wiring Installation - 2013 Honda Odyssey
- Video: Installation: etrailer Trailer Hitch Receiver on a 2011 Honda Odyssey
- Video: Setting up the Curt Trailer Hitch Receiver on a 2022 Ram 1500
- Video: Mount: Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center on a 2019 Ram 1500 Classic
- Search Results: hitch ball
- Video: DIY Install: Draw-Tite Max-Frame Trailer Hitch Receiver on your 2015 Honda Odyssey
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Shop: Brake Controller
- Search Results: trailer hitch ball mount
on Trailer Hitch
Phani D.
6/11/2020
How much a mechanic might charge for installing the Draw-Tite hitch # 75270 on 2015 Honda Odyssey. I will be using only to carry 4 bikes. Do I need any other accessories to install the hitch?