Difference Between Square and Round Tube Trailer Hitches for 2010 Honda CR-V

Question

Question:

Hi, I need to add a trailer hitch to my 2010 Honda CRV. Do the trailer hitches with round frame construction offer great towing capacity/strength over the square frame hitches? Is that what sets the two types apart? Thanks.

asked by: Lynda

1

Helpful Expert Reply:

There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame # 24792, feature a square tube design, while the Class III hitches like the Draw-Tite # 75547 have a round crosstube. This crosstube shape may appear to indicate the hitch's strength, as they differ between the two classes, but the design is typically only relevant to the physical appearance of the hitch. A round tube provides a sleeker look and will typically be a bit more hidden than a square bar. The particular design does not necessarily refer to its strength or capacity. There are trailer hitches available (for other vehicles) with a much higher capacity that feature s square crossbar.

For your Honda CR-V, I recommend going with the Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75547. This hitch is custom fit for your vehicle and will use existing holes in its frame for a no-drill installation. Even if you do not plan on coming close to the capacities on this higher-rated hitch, the 2 inch receiver opening will open the door for a lot more options if you are looking to use a hitch-mounted bike rack or cargo carrier. The options available for 1-1/4 inch receivers, which is what a Class I hitch provides, are simply more limited.

I have attached the installation instructions and a video on the 2011 Honda CR-V that you can use for reference.

If you are looking to do any towing, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118427. This custom-fit harness is confirmed to fit your CR-V and will install by connecting directly to the existing ports located behind the driver side trim panel. This will provide your vehicle with the 4-Way connector needed to connect with and power the trailer's signal lights.

You will also need a ball mount and hitch ball. I have attached an article that explains how to choose the best one for your setup along with a link that will take you to our available selection. I have also included a couple articles on trailer towing that you might find helpful.

expert reply by: Chris R

1

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 3

The 2001 Fleetwood Mallard 26H travel trailer has a specified weight of 5690-lbs so it is likely to have two 3500-lb-rated axles. You can confirm this axle rating by checking the sticker or plate on the axle tube itself, or it could be included in…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Technically speaking a square tube hitch has less chance of twisting than a round tube. This is why all of the heavier rated hitches for large trucks are squre. With that being said either style is designed and tested to meet certain specifications…

view full answer...

Answer 6

That is a great question. There are three Class III trailer hitches available that are confirmed to fit your 2018 Honda CR-V. As you mentioned, the etrailer.com #e98848 and the Curt #C13397 both feature a square crosstube while the Draw-Tite #76128…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 9

First, what you should know about aftermarket parts is that you are protected by the Magnusson-Moss warranty act that states in part that your warranty cannot be voided unless the aftermarket part actually caused the problem. Next, if the 1-1/4 inch…

view full answer...

Answer 10

The best trailer hitch for your 2019 Subaru Outback Limited is the Curt #C13206 because it has the best bumper clearance among hitches that fit your car; this hitch is a fit for both the 2.5i Limited and 3.6R Limited. This Class III, 2" trailer…

view full answer...

Answer 11

You can absolutely use the Kuat Sherpa 2.0 bike rack with your 2012 Subaru Legacy, and all you need is the right trailer hitch in order to do so. For that, what you will need is a hitch from Draw-Tite: - Draw-Tite Max-Frame Trailer Hitch Receiver…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Difference Between Square and Round Tube Trailer Hitches for 2010 Honda CR-V

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching