Trailer Hub and Drums for 3,500 lb Trailer Axle
Question:
Hello, We have a 1999 ww enclosed trailer with tandem #3500 torsion axles. With what appears to be a 4.5inch lug pattern. One of our tires fell driving down the road from the bearings going bad. I am needing to replace all bearings and brake assemblies to be safe. How can I determine the right part numbers needed? We have Hub/Drum assembly on there now! Thanks
asked by: Diego
Expert Reply:
We probably have the hubs that would fit your spindle but you need to first make sure the spindle of the wheel that fell of while driving isn't damaged and in need of replacing. If the bearings were so bad the hub and wheel came off most likely the spindle is totally wrecked.
The Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K is a 3,500 lb rated hub and drum with a 5 on 4-1/2 inch bolt pattern which comes with bearings.
The brake assemblies part numbers # AKEBRK-35L-SA and # AKEBRK-35R-SA would then be the correct assemblies to use.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How To Fill Dexter EZ-Lube Spindle/Hubs With Grease And How Often Should They Be Filled?
- Q&A: How to Identify Replacement Hub for Trailer
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Video: Detailed Breakdown of the LubriMatic Prime Guard High Temperature Wheel Bearing Grease
- Video: All About the LubriMatic Prime Guard High Temperature Wheel Bearing Grease
- Video: Hands-On with the Dexter Multi-Purpose Lithium Grease
- Search Results: 10 19 seal
- Search Results: spindle
- Search Results: grease
- Search Results: 23~312
- Search Results: square spindle
- Search Results: 84546uc3~ez
- Search Results: 23~313
- Shop: Dexter Multi-Purpose Lithium Grease - 14 oz. Cartridge
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 10" - Right Hand - 3,500 lbs
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Shop: Trailer Wiring
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
on Trailer Hubs and Drums
