Replacement Step Pad For 3 Inch Nerf Bars With 20 Inch By 3 Inch Pad

Question

Question:

I am not sure of the brand of my bar but the step pad is 20inch X 3 inch and it is 6inch between end peg and next peg. Do not want to take it completely off until I find a replacement, so do not know dimension to next peg. Thanks for any help.

asked by: Michael S

0

Expert Reply:

The closest replacement pad we have to what your mentioned is the Replacement Step Pad for Westin Signature Series Nerf Bars - 19-3/4" Long - Qty 1 # 26-0001. I have attached 2 photos of one of this replacement pad. One photo shows the outside dimensions of this pad, which is 19-3/4 inches long x 3-1/8 inches wide. The second photo shows the spacing for the mounting holes. This pad requires 4 barrel clips, part # 23-0002, which are sold separately.

The # 25-0001 is a similar size at 19-3/4 inches long with pins 6 inches and 6-1/2 inches apart as you can see in the attached photo.

expert reply by: Jason S

0

click to enlarge

Anthony W.

2/26/2020

Will these step pads work on my wildcat flash nerf bars?

Reply

Chris R.

2/27/2020

You would really just need to compare the dimensions Jason provided for the various replacement pads to see if they might fit your Wildcat Nerf Bars. Since these pads are specific to particular model nerf bars I wouldn't have a way of knowing if they fit your Wildcat brand boards. If you can tell me the size of your pads (along with the mounting hole spacing) I may be able to find something that could work.

Helpful Links

dept-pg-Accessories_and_Parts-pt-Step_Pad.aspx

Reply

Edward G.

3/11/2021

@ChrisR I am not sure of the brand of my bar but the step pad has STAR logo and is 19 5/8inch X 3 inch from the end the 1st peg is 2 1/4" in center. The next two are 7" from the end and 3/4" from outside edge. The next two pegs are 12 9/16" from the end and 3/4" from the edge. The next one is 17 1/4" from the end and in center of pad for a total of six pegs. Any help would be appreciated even if I have to drill new holes. The vehicle is a 1999 GMC Sierra 1500 regular cab 4x4. Going to give to my grandson for his sweet 16 birthday

Reply

Jon G.

3/12/2021

@EdwardG We don't have any that fits those dimensions exactly, but if you plan on modifying the nerf bar then I think your best option is to go with the Westin Pad # 25-0001 because it measures 19-3/4" long and fits a 3" wide nerf bar. This only has 4 pegs so you would need to drill some new holes, and since it's a different brand than what you currently have I can't really guarantee a clean fit, but it's the best option that we have.

Reply

See All (5) Replies to Anthony W. ∨

Answer 1

I do see the back of the Replacement Step Pad #AA2090161 has 8 ribs while the back of the Replacement Step Pad #AA2090133 has 10 ribs.

view full answer...

Answer 2

The Replacement Step Pad for Aries 3" Wide Oval Nerf Bars #AA86FR measures 6.496” apart center-to-center for the inner pins, and the two outer pins measuring 17.795” apart center-to-center. It's not uncommon for replacement pads to fit from…

view full answer...

Answer 3

We do carry replacement pads for Nerf bars. You will need to take some measurements to find the correct replacement. The only step pad we offer that is 19-3/4 inches in length is the Step Pad for Westin Signature Series Nerf Bars, part #25-0001. The…

view full answer...

Answer 4

While we do not carry the direct replacement barrel clips for Aries Step Pads like the Replacement Step Pad for Aries 3" Wide Oval Nerf Bars #AA2090139, we do have the Replacement Barrel Clip for Westin E-Series Round and Platinum Series Oval…

view full answer...

Answer 5

To replace the step pad on a Westin E-Series Nerf Bar like the #23-1680 you'll need to use the Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1 #23-0001, which will work on any of the 4 spots these pads…

view full answer...

Answer 6

The closest replacement pad that we have is the Replacement Step Pad for Westin Signature Series Nerf Bars #25-0001. I have attached a dimensional photo for you to check out. Please note that if you don't have Westin Signature nerf bars this…

view full answer...

Answer 7

I attached a link to a page that has all of the step pads we offer but I can't really tell what you have since your picture is so dark. Maybe a brighter picture would be helpful.

view full answer...

Answer 8

For a set of 3 inch round Aries running boards the correct replacement step pad is the part #AA2090139.

view full answer...

Answer 9

You can find the replacement barrel clips here with #23-0002, for your Replacement Step Pad for Aries 3" Wide Oval Nerf Bars #AA2090139.

view full answer...

Answer 10

I went out to our warehouse to take a look at the Aries Replacement Step Pad #AA2090139 that your referenced and measured a distance of right at 3-3/4" between the first two pegs, on center. While out there I went ahead and measured the spacing…

view full answer...

Answer 11

I spoke with Aries and they told me that the Replacement Step Pad for Aries 3" Wide Oval Nerf Bars #AA86FR measures 19.736”, is 3.125“ wide, the two inner pins are 6.496” apart center-to-center, and the two outer pins are 17.795” apart…

view full answer...

Answer 12

Actually the Westin barrel clips part #23-0002 are the same as what comes with the part #NB-PAD2 that would fit your bars so these would work well for you.

view full answer...

Replacement Step Pad For 3 Inch Nerf Bars With 20 Inch By 3 Inch Pad

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching