Parts Needed to Install a 7-way Trailer Connector and Tow a Trailer with a 2009 Toyota Tacoma
Question:
I have a 2009 Toyota Tacoma pickup with the 4 cylinder engine. It is the plain cab model with no extra features. Anyway, I have a trailer that has the round 7-blade type connector and I seem to be unable to find any wiring harness that will fit this kind of connector available to fit the truck. All of the truck harness assemblies I have found so far are the flat four connection type. I would hope to be able to have a harness with the female part of a 7 blade connector hanging from the back bumper area. There is no pre-existing connector on the truck. Is there any way I can do this?
asked by: Tom H
Expert Reply:
Yes, you can install a 7-way trailer connector on your 2009 Toyota Tacoma. There's a couple of options depending on your trailer.
First you're going to need to start with a 4-way flat connector like you've already found. I suggest the Curt # C55513 which plugs into your truck's wiring either behind the taillights or the rear bumper.
Once you have the 4-way, if your trailer does not have brakes you can use an adapter, # 37185, to go from the 4-way to provide a 7-way. However, installing it this way will only give you the same functions as a 4-way: stop, turn signals, and running lights.
For a fully functional 7-way connector because your trailer has brakes you'll need to use our # ETBC7 kit to use the 4-way you installed and provide a fully functioning 7-way. This will include everything you need to install an electric brake controller as well.
If you need a brake controller I suggest the Prodigy P2 # 90885. I've linked a video that shows the # ETBC7 kit being installed into a 2009 Tacoma with a different controller, but the install process will be the same with the P2.
The trailer hitch receiver, if your truck doesn't already have one, is the Curt # 13323. This will bolt onto your Tacoma and all the hardware is included.
You'll also need a ball mount. I've linked our selection that will fit the 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you need. I like the B&W Tow & Stow # BWTS10038B which will provide up to 5 inches of drop or 5-1/2 inches of rise. It also features the ability to flip over under the hitch and out of the way when not in use. To lock the ball mount to our hitch use # BX8858 or for a standard pin and clip use # PC3.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 5500 lbs WD GTW
- 2 Inch Hitch
- 550 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- Two Balls
- 1-7/8 Inch Ball
- 2 Inch Ball
- Steel Shank - Matte Black
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- B and W
more information >
Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Flush Pin
- 2-3/4 Inch Span
- Blue Ox
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Q&A: Can the Taillight Converter part # 118158 Be Used with LED Taillights
- Q&A: Replacement 7-Way Trailer Connector for 2009 Toyota Tacoma with Factory Tow Package
- Shop: Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors
- Shop: 2-to-3 Tail Light Converter for Towed Vehicles w/ Incandescent Tail Lights
- Shop: ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Shop: Curt 4-Way Flat Trailer Connector with Circuit Protected Powered Tail Light Converter
- Shop: Reese Multi-Plug Wiring Harness for Factory Tow Package - 7-Way and 4-Way Flat Trailer Connectors
- Shop: Hopkins Endurance Quick-Install 7-Way Trailer Connector
- Video: Best 2009 Toyota Tacoma Trailer Wiring Options
- Video: Set up: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2008 Toyota Tacoma
- Video: How to Set Up Your Tekonsha Prodigy P3 Trailer Brake Controller on a 2009 Toyota Tacoma
- Shop: Trailer Hitch
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Search Results: wiring adapters
- Search Results: wired control
- Video: Detailed Breakdown of the Curt Trailer Connector Adapter with Backup Alarm
- Video: Finding the Right Trailer Wiring Harness
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Search Results: trailer wiring
- Video: How to Choose a Trailer Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Shop: Brake Controller
- Article: My Trailer Hitch Doesn't Fit
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
on Custom Fit Vehicle Wiring
Ronnie J.
9/5/2020
What do I need for a 2014 Tacoma pre runner.what harness do I need,and I need a 7 round outlet and electric brakes set up.