What is the Towing Capacity for a 2001 Subaru Outback and Trailer Hitch and Wiring Recommendations

Question

Question:

Hi there. Do you know the towing load capacity for a Subaru Outback 2001? Im looking to purchase a small boat and would like to install a hitch to pull it with, but dont want to blow out my transmission. Thanks!

asked by: Michel

0

Expert Reply:

It took a little research but I was able to find the towing capacity information for the 2001 Subaru Outback in the online owner's manual. For manual transmission models and a trailer with no brakes the towing capacity is 1,000 pounds; with brakes it is 2,000 pounds.

It is the same for automatic transmissions (1k without brakes or 2k with brakes) but also Subaru says:

When towing a trailer on a long uphill grade continuously for over 5 miles (8 km) with an outside temperature of 104°F (40°C) or above the capacity is 1,000 pounds.

That seems oddly specific but there it is. Consult your owner's manual to confirm this and other fun facts about your Outback.

For a trailer hitch you can use # 36284. I have included a link to a video showing an example installation for you. The recommended ball mount is # 36061. With it you can use 1-7/8 inch ball # 19257 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118461.

Regarding the wiring if you need to tow a trailer that does over 1,000 pounds (and that trailer has electric brakes) we will need to set you up with a brake controller and 7-Way trailer connector. So in this scenario in addition to the wiring harness listed above you will also need # ETBC7 and a brake controller such as # 90885. I have linked some helpful information on this installation should you need it.

Since you are concerned about your transmission I recommend adding a supplemental transmission cooler, # D13502. This cooler will aid the factory cooler which will help out your transmission tremendously especially when towing.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 4

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…

view full answer...

Answer 9

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Hey Isaiah, thanks for reaching out! I recommend the etrailer Trailer Hitch Receiver #e98912 2025 Subaru Crosstrek simply because it has a matte black finish that offers a better look and protection over the glossy black finish we see on the other…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

What is the Towing Capacity for a 2001 Subaru Outback and Trailer Hitch and Wiring Recommendations

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching