Can Hair Dryer Be Used For Deka Heat Shrink Butt Connectors

Question

Question:

Will a hair dryer work well enough to shrink the heat sink connector?

asked by: Herb M

0

Expert Reply:

A hair dryer is exactly what works great when using the Deka Heat Shrink Butt Connector, part # DW05743-10.

Using these butt connectors will help keep any moisture and dirt out of the connection for you.

expert reply by: Jeffrey L

0

Answer 1

If you have a 4-way trailer connector like #118418 then I recommend using a wishbone harness to wire your trailer. The 20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground #A20WB is my recommendation for your wiring because it will…

view full answer...

Answer 2

Would you be able to send me some pictures of what your current lights look like and the triangular plugs that you mentioned so I can help you get something that works best?

view full answer...

Answer 3

I do have a great option for you, however the etrailer.com Trailer Hitch Receiver #e98865 that you referenced will not fit your 2009 Saturn Vue. This particular hitch is designed for the Saturn Vue up through the 2007 model year, so it will not line…

view full answer...

Answer 4

Using butt connectors such as #05731-5 is probably the fastest way to connect wires. Using a heat shrink butt connector such as #DW05744-5 would be a better, longer lasting connection. The white ground wire will need to secure to the trailer frame…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Can Hair Dryer Be Used For Deka Heat Shrink Butt Connectors

Product Page this Question was Asked From

Continue Researching