Troubleshooting Trailer Wiring Where Only Left Hazard Light Works
Question:
OK now what do I do? All the grounds I can see are tight but only left hazard light works. No running no break lights ...help.
asked by: Dean F
Expert Reply:
First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached.
If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue.
Make sure that the trailer side connector is clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. The light grounds should also be attached to clean and corrosion free bare metal surfaces. If there is anything between a light ground and the metal trailer frame or if the trailer has an aluminum frame, tilt bed, or folding tongue, any of these things can interrupt the ground. Running jumper wires from the light grounds to the main trailer connector ground can help.
If the problem is on the vehicle side then I would first recommend you double check how the harness is installed on your vehicle, make sure all of the connections are good and tight. You should check all towing related fuses and relays as well.
Products Referenced in This Question
Product Page this Question was Asked From
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Draw-Tite
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Set up: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2020 Acura RDX
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Location of Trailer Wiring Harness Plug on 2007 Acura RDX
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: Turn Signals on Trailer Not Working When Running Lights are On
- Shop: Trailer Hitch
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Wiring New Trailer Tail Lights to a Trailer with Only 2 Wires
- Search Results: trailer hitch
- Video: Finding the Right Trailer Wiring Harness
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: trailer wiring
- Video: How to Choose a Trailer Brake Controller
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Search Results: hitch
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Search Results: trailer hitch ball mount
- Shop: Suspension Enhancement
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Article: How to Measure for Trailer Hitch Drop
on Trailer Wiring
