Can Copper Grease Be Used in Trailer Hubs
Question:
hi. I packed my boat trailer wheel bearings with copper based grease. I filled the rest with lithium based grease. Will this be o.k. Thanks
asked by: Dale
0
Expert Reply:
Copper grease is an anti-seize compound and not a lubricant so I cannot recommend you use it for your boat trailer hubs.
Instead I would recommend you go with Red grease like part # L11390 as this is the highest quality grease for trailer hubs. It resists water and heat better than multi-purpose grease.
expert reply by:
Jameson C
0

Products Referenced in This Question
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Marine Bearing Grease
- Calcium Sulfonate
- 3 oz
- LubriMatic
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Braking Hub w/ a 5 on 4-1/2 Lug Pattern and Brake Assemblies for a Lippert 3,500 lb Axle
- Q&A: What is the Best Grease for Trailer Bearings
- Article: Most Popular Wheel Bearings
- Q&A: Bearing Kit and Grease for Dexter 7,000 lb Trailer Axle
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: Can Integrated Brake Controller of 2024 GMC Sierra 3500 Work with Hydrastar Actuator for Keystone
- Q&A: Air Ride Pin Box for 2023 Keystone Cougar 320RDS
- Article: How Much Does a Boat and Trailer Weigh?
- Q&A: Grease Used in CE Smith Pre-Greased Hub CE13110
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision