Customers compare S512-S512X to these similar products
Products Featured in this Video
What's up everybody, it's AJ with etrailer.com. Today, we're gonna checking out the Rhino-Rack two Kayak Carrier kit. So, what's gonna happen is on this one you're gonna get the J-Style Kayak Carrier with the extension arm, allowing you to add a second kayak here. And then have some room to spare and add a cargo basket on the other side. Let's check it out. The nice thing about this being a kit is… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hi Nathan, The Rhino-Rack Roof Rack Legs #RRRL110S5-2 are a fit for the gutters on your 2023 Jeep Wrangler, but they are only 4-5/16" tall so you'd likely run into clearance issues with the sky top. To confirm you can measure up…
view full answer...The only way to attach a Thule roof rack to your 2021 Jeep Wrangler Unlimited Hardtop is going to be with a gutter mount solution like the #TH711500 and #TH65BJ. There isn't a way to adapt a Traverse foot to the hardtop of your Wrangler.
view full answer...I attached a picture of a single kayak carried by the Yakima SweetRoll Kayak Carrier #Y04074 and it takes up most of the roof rack crossbars which would be longer than what you have so I'd anticipate two not fitting but I do have a solution.…
view full answer...The Rhino-Rack J-Style Kayak Carrier #S512 should fit your 2021 Toyota RAV4 roof rack just fine, but make sure the crossbars are no wider than 3-1/8" and no taller than 1-1/4" to verify fitment. You can install 2 of these kayak…
view full answer...There is no preferred crossbar spread listed for the paddleboard carriers we offer. They do however list the minimum crossbar spread at 24-inches. This is the minimum distance needed for part #TH811XT and #Y04075. Both carriers have weight…
view full answer...While your 2015 Chevrolet Sonic LTZ with an automatic transmission can be flat towed I would recommend using a Dolly #DM9713045 since you are required to stop and run the engine when towing(see owners manual) for extended periods of times. This…
view full answer...Check out the picture I attached that shows all three different ways the mounting hardware for the Dockgrip part #TH895 can be orientated. I would try the setup on the right if it seems like the bars aren't thick enough.
view full answer...Great News! The Thule Hull-A-Port XT Kayak Carrier TH848 is 100 percent compatible with the Malone AirFlow2 Roof Rack systems like part #MPG216. The Hull-A-Port uses the clamps on the bottom which will grab a hold of the Malone bars for an…
view full answer...The TruXedo Elevate Truck Bed Rack System #TX96NV has rails that add a mounting lip to be compatible with most inside-the-bedrail mounted tonneau covers like the BAKFlip MX4 Hard Tonneau Cover #BAK48329 you referenced. The issue people tend to run…
view full answer...I do have an option for you but there isn't a way to add an additional paddle holder to the Rhino-Rack 2 Kayak Carrier part #S512-S512X. That said, you could simply use the Rhino-Rack Multipurpose Holders for Roof Rack Crossbars part #RRRMPHU…
view full answer...Unfortunately we do not have any videos showing the removal of the Thule Evo Rail Feet #TH710401. Since there is only the one bolt that both tightens the clamp on the raised rail and secures the crossbar to the foot that is all that should be…
view full answer...The Crossbar Adapters for Rhino-Rack J-Style Kayak Carriers S510, S511, and S512 #KC-FK8 contain the tooling needed for 1 set of kayak carriers. There are different components in each kit as it is designed to fit HD crossbars and Aero bars that…
view full answer...