Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
Item # RM-152-98146-7
Our Price: $193.11
Confirmed to Fit
2011 Toyota FJ Cruiser
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (251)
- Q & A (0)
- Photos
2011 Toyota FJ Cruiser - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.
Features:
- Complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along same wire
- Diodes prevent electrical feedback and the damage it can cause to your car's electrical components
- 7-Wire to 6-wire adapter cord allows you to run power from your RV to your towed vehicle
- Straight cord is ideal for all-terrain tow bars and other tow bars that have channel guides
- 6-Way socket wires to harness and mounts on towed car with included bracket
- Sturdy, durable construction
- Powder-coated aluminum casings protect diodes from corrosion
- Electrical cord resists water, oil and chemicals
- Silicone-injected plugs prevent corrosion
- Kit includes:
- 4 Hy-Power diodes
- Wiring harness
- 7-Way to 6-way adapter cord
- 6-Way socket with mounting bracket
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Limited Lifetime Warranty
Specs:
- Maximum amperage: 85 amps
- Maximum voltage: 24 volts
- Adapter cord length: 6-1/2'
- Wire gauge: 16
- Wiring harness length: 30'
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
RM-152 Roadmaster Universal Hy-Power Diode Wiring Kit
RM-98146-7 Roadmaster Wiring - Straight 6 to 7 - 78" Long
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord - RM-152-98146-7
Average Customer Rating: 4.7 out of 5 stars (251 Customer Reviews)
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.by: Bill11/06/2023
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service!
During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors.
A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
by: Edward 05/16/2024
I also purchased brackets and receivers for the tow bar. Both were as advertised and are functioning very well. The staff were also very knowledgeable and helpful. Hard to find service of this kind in today’s world.
by: Phil 04/04/2024
The installation ins ructions and video were very helpful. The wiring kit worked perfectly.
by: Jason05/08/2023
Great kit. Easy to install. Connectors seem solid and wires are good.
by: James02/24/2024
The installation took some time and the instructions need to be clarified.
by: Dean 10/18/2023
Roadmaster
The Roadmaster 4 diode wiring kit has worked great for a full towing season.
Easy installation, great instructions, and added safety while towing.
The wiring kit easily integrated into the other braking and towing system components.
Thanks e-trailer!
by: Daniel05/02/2024
Easy install. Good directions. Works as described.
by: William 08/03/2023
This kit worked great. It was easy to install (etrailer offers installation videos if needed). I like this much better than a temporary set of lights on the towed vehicle. The cord and plug are also good quality.
by: Janes01/10/2024
Easy instructions and works great!!!
by: Joe H08/31/2022
See my review on the Base Plate. The electric was a little wonky but my mechanic met with the manufacturer and was able to figure it out. That said, once it was resolved, it has worked flawlessly.
by: Juan09/15/2021
2013 Subaru Forester
Works as expected. Connection feels solid enough. Have not had the opportunity to take it on a long trip yet.
One thing bit us in the butt, forcing us to cancel a trip at the last minute (when testing that our towed vehicle's turn signals, brake lights and supplemental brake system was working before driving off!): the left-turn signal prong in the male part of the connector (that plugs into the towed vehicle) was not opened enough, so no steady connection was being made because there was no contact between the prong and the walls of the female part. This had worked in a previous test. Picture included. Make sure to use a flathead screwdriver to open each prong up so full contact is made!
by: Stephen B07/14/2023
I have not been disappointed with anything I have ordered from you.
This wiring kit should do the trick for my flat towing project.
I am sorry that I couldn’t get all of the pieces from you, the transmission pump and base plate was ordered from another company.
This is my fourth camper you are helping me keep maintained and improved.
2000 Cougar 5th wheel bunkhouse,2016 Sprinter 5th wheel front living room , 2021 Nexus 31t class C and a 2016 sprinter tow behind.
by: Bruce 10/04/2023
Easy to install. Would prefer a different method for securing the diodes. I used zip ties of good quality from Ty-Rap instead of the box store cheap imitations.
by: James04/10/2022
2019 GMC Acadia
Very straight forward install, easy to follow instructions. If you do this your self be prepared, the factory light wiring isn't very long or thick it was difficult to strip the wire back far enough to double it over to get a good connection. Upon completion of the wiring, I double checked all power at both plugs, it was all good, I installed the lights, brake and turnsignals worked great, I didn't have any running lights. About 3 min later they came on and stayed on. I don't believe this has any thing to do with the kit, this vehicle has all kinds of light sensors, darkness sensors, rain sensors.. etc. I believe it just too a min or 2 for the lights to actually come on.
by: Steve05/27/2021
I chose the order by phone option. The website is well organized, but, I had gone too long without hearing another person. I have received several orders from etrailer after purchasing an RV last summer. I knew we would be Purchasing a Toad.
I don’t have any experience with towing another vehicle, so I had plenty of help in finding the right equipment for me.
The delivery times were all easily tracked and arrived in good condition. As md on time.
I had the simple tools required to install the base plate and hitch. The videos available on their site are clear and easy to understand.
I have had a great overall experience with etrailer.
by: James04/20/2022
Toyota Tacoma
I had a Toyota Tacoma that has separate blinker lights. Took a mechanic that was knowledgeable in electrical wiring. Followed the instructions and it worked perfect. Used it several times since
James J.
4/21/2023
Great. Been on several trips. No problem
by: Wayne05/17/2023
All running and signal lights work great. But no license plate light illumination.
Jenny N.
5/23/2023
You are correct in that the tow bar wiring harness part # RM-152-98146-7 will not illuminate the license plate light as the diodes are meant to keep the signals from backfeeding into your vehicle wiring. We have checked into this and having the license plate light is not mandatory when flat towing.
by: Tom F09/10/2023
2020 Jeep Wrangler
Very straightforward. I followed along to one of the videos on etrailer's site and it went very easy for me thank you etrailer!
by: Richard 02/23/2024
Works great.
by: Beemerjohn12/27/2023
Wiring was about 8 feet short to complete the task.
by: Don 04/13/2023
Honda
Kit worked well. On 2012 Honda CRV I was able to run the wire to the rear under interior panels then install diodes inside each quarter panels eliminating any wiring or component connections exposed to the weather.
by: Boyd10/03/2022
2003 Jeep TJ
1 star is simply for the fact that the straight cord is too short. Bought to use with a road master tow bar. Since I needed a drop hitch to line the tow bat up with the toad I needed about a foot more cable. Tried to make do with the one supplied. I ended up having to spend an hour in the parking lot of an rv store wiring up a new one on my first trip. You would think for [local stores] you have to pay for this they could spring for a little extra wite.
Katrina B.
10/17/2022
That is unfortunate that there was not enough wire for your application. We do carry 16 gauge bonded 4 wire, part # 16-4B-1, by the foot. You can always contact our customer service department for them to assist you in getting this wire ordered.
by: Edwin01/27/2023
It was the installation that was a issue, it works great now that I finally got it installed correctly. Had to go through 3 companies before it worked. It cost me 3 times as much, I went to a recommended installer from your site, and they hook it up but didn’t used the diodes that were provided. I took it back, and asked them to install the diodes.(the company “Fatal LLC”) charged me [XX] I kept getting feedback when the emergency lights were used, they say it’s normal for that to do that. I didn’t believe it, so I-took it to camping world, they rewired it and used a different diode don’t asked me why, but it-still didn’t work they said it would eventually work itself out, It didn’t, so I had still have the problem with the feedback when using the emergency flashers. I guess I’ll live with it. It works I guess….
by: Neal 04/08/2023
2023 Jeep Wrangler
Have not installed yet (DUO Brake system and wiring) from what I have seen I am impressed with all parts delivered.
tow bar Plate is more than substantial and the Tow bar is amazing.
by: Matt09/03/2022
I ordered base plates and the wire harness, the wire harness would not allow for brake, running, and turn signal lights, I had to omit one, the turn signals. The base plates where difficult, requires removing the front of the car. the video did not state the distance front to rear, I was a half inch to far forward and the fog light would not fit.
Jenny N.
9/20/2022
You mentioned that the harness would not allow for the brake, running and turn signal lights. For vehicles that have separate turn and brake lights, this kit will cause your brake lights to function as both brake and turn signal lights. This is perfectly fine. If you want to have both separate turn and brake signals, then you will need part # 118158 and part # RM-792 to do so.
25
251
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- How to Dinghy Tow a 2017 Nissan VersaAccording to page 10-17 in the online version of the owner's manual for your 2017 Nissan Versa, if the vehicle has a manual transmission then it can be flat-towed with four wheels down but if it has an automatic or continuous variable transmission (CVT), it must be towed using a tow dolly under the drive wheels. If you have the automatic or CVT transmission then I recommend the Roadmaster Tow Dolly part # RM-2050-1. This dolly has electric brakes for safety. It also comes with lights...
view full answer... - Parts Needed To Flat-Tow a 2020 Jeep Cherokee TrailhawkIn order to flat-tow a 2020 Jeep Cherokee Trailhawk you'll need a base plate kit, tow bar, safety cables, wiring harness, a supplemental braking system, and possibly a few other things. I will list my recommendations for each of these below. etrailer Invisible Base Plate Kit part # e98951 etrailer SD Non-Binding Tow Bar part # e34ZR Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles part # RM-152-98146-7 Blue Ox Patriot Portable Braking System part # BLU37TR The Mopar Flat-Tow...
view full answer... - Recommended Flat Towing Setup for a 2019 Chevrolet Colorado 2WDThe etrailer Invisible Base Plate Kit # e98966 you're looking at is only made to work with the 4WD versions, however I was able to contact Roadmaster and confirm that their Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-523182-5 is a fit for the 2WD. That said, you'd still have disconnect the drive shaft as not doing so will damage your vehicle. If you need parts to complete the flat towing setup, you're also going to need: -A tow bar like the Roadmaster Falcon 2 Tow Bar...
view full answer... - Parts Needed To Flat Tow 2023 Subaru CrosstrekThe only 2023 Subaru that has a base plate for flat towing at this time is the 2023 Subaru Crosstrek. Keep in mind, you can only flat tow the Crosstrek if it has a manual transmission. You will need the following parts to make a "kit": -Roadmaster Direct-Connect Base Plate Kit # RM-52927-5 -Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 -Roadmaster 4-Diode Universal Wiring Kit # RM-152-98146-7 -Brake Buddy Select 3 Portable Supplemental Braking System # HM39524
view full answer... - Installing the Roadmaster Universal Brake Monitor on 2013 Subaru Forester with InvisibrakeI can certainly clear all this up for you and I was able to confirm this information with Roadmaster directly in regards to your 2013 Subaru Forester. When tapping into the breakaway wire on the Invisibrake # RM-8700 to complete the installation of the Roadmaster Universal Brake Monitor # RM-9530, you will want to tap into the thick yellow wire you mentioned; you'll just need to cut into the thick covering on the wire and make your connection. When it comes to the blue wire on the # RM-9530,...
view full answer... - Diode Lighting Kit for 2019 Chevy Suburban & Does Battery Need to be DisconnectedLet's start with the lighting kit for your 2019 Chevy Suburban, and there are diode wiring kits available. The best option due to its reliability is going to be from Roadmaster, the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7. In regards to your battery, it does need to be disconnected in order to flat tow your Suburban, so what you will need is the Roadmaster Automatic Battery Disconnect with Switch # RM-766. What this...
view full answer... - Complete Flat Towing Setup For A 2022 Ford Ranger With Roadmaster Base Plates & A Blue Ox Tow BarIt's up to you entirely however, it's much easier to just use the adapter # RO64FR so you can use your Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380 with your Roadmaster Direct-Connect Base Plate Kit # RM-524459-5. If you don't want to use an adapter, you can use the Blue Ox Base Plate Kit # BLU77XR which will connect directly to your Blue Ox # BX7380 tow bars. Finally, if you need a complete setup as well, you'll also need: - A braking system # RM-9060, with a brake light relay # RM-88400,...
view full answer... - Recommended Wiring Kit for Flat Towing 2020 Ram 1500 Behind RVFor your 2020 Ram 1500 I really like the Roadmaster Diode Flexo-Coil Wiring Kit # RM-15267, which includes everything you need to wire up the truck so that its tail lights accept the signal lights from the RV during travel. You will use it to tap into the tail light circuits on your Ram and it includes a 6-Way connector that gets mounted to the front bumper, along with enough coiled wiring to go from there to the 7-Way on the motorhome. If your tow bar has accommodations for the wiring...
view full answer... - Flat Towing Package for 2022 Jeep CherokeeYou'll need a tow bar, base plates, safety cables, wiring for the taillights, a supplemental braking system, and possibly a high/low adapter if the installed height of the base plates has a height difference compared to the motorhome hitch greater than three inches. I'll link to an article that shows how to measure for the height difference, along with a listing of our available high/low adapters. For a tow bar, I'd recommend the Roadmaster Falcon All-Terrain tow bar, part # RM-522 along...
view full answer... - Recommended Flat Towing Setup For 2017 Honda HR-V EX With Manual TransmissionI would be happy to go over everything needed to flat tow your 2018 Honda HR-V EX 4WD with the manual transmission. Starting with the base plate kit I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521570-5 which is compatible with the Roadmaster Falcon All-Terrain # RM-522. The # RM-522 is one of our most popular tow bars due to the the non-binding arms that allow you to quickly and easily unhook your vehicle even on un-even terrain. Next is tow bar wiring...
view full answer... - Recommended Setup for Flat-Towing a 2018 Ford Explorer with 3.5 Liter EngineYes, I confirmed with your 2018 Ford Explorer manual that you can flat-tow your 3.5 liter Duratec/EcoBoost engine with all four wheels on the ground. In order to achieve this, you need a base plate, a tow bar, a tow braking system, safety chains, and vehicle tow wiring. I recommend the following setup: - etrailer Invisible Base Plate Kit - Removable Arms # e98962 - etrailer SD Non-Binding Tow Bar - RV Mount - 2" Hitch # e34ZR (comes with safety cables) - Brake Buddy Classic 3 Portable...
view full answer... - Recommended Flat-Tow Wiring Harness for a 2009 Honda CR-VThe flat-tow wiring harness I recommend for a 2009 Honda CR-V is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 if the tow bar does not have channels for the umbilical and safety cables or the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles part # RM-152-98146-7 if it does. These kits are my personal favorites as they require minimal modifications and are very reliable The Falcon 2 does not have channels whereas the Falcon All-Terrain does have channels....
view full answer... - Does Roadmaster Battery Disconnect Work with Diesel 2020 Chevy Silverado 1500 3.0 LiterI checked with Roadmaster and the RM-766 cannot be used with the diesel engines likes what you have in your Silverado. The lighting kit part # RM-152-98146-7 will fit and work great in your 2020 Chevy Silverado 1500.
view full answer... - Recommended Flat-Tow Setup For 2003 Honda Element Being Towed By 2014 Mercedes-Benz SprinterWhile we do not offer a flat-towing kit for your 2003 Honda Element, I would be happy to recommend all of the parts you will need to safely flat-tow it with your 2014 Mercedes-Benz Sprinter Motorhome. First you will need a custom fit base plate kit, I recommend the Blue Ox Base Plate Kit # BX2232 which will blend in pretty well to the grille with the arms removed as you can see in the included picture. Moving on to a tow bar compatible with the Blue Ox # BX2232 I recommend the Blue Ox...
view full answer... - Does Base Plate Fit 2021 Nissan Frontier With Automatic TransmissionIt does; the "Manual Transmission" spec on the page is due to the fact that only the manual transmission for your 2021 Nissan Frontier can be flat towed, unless you get a drive shaft disconnect like you are. But the transmission does not affect the fit of the base plates, so they will work on your '21 Frontier. Along with the base plates there are a number of other parts you'll need, which I'll go ahead and list out for you: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit #...
view full answer... - Roadmaster Direct-Connect Base Plate Compatibility With A Roadmaster Falcon Tow BarYes, the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521451-5 you mentioned will fit your 2022 Jeep Cherokee Trailhawk. This base plate is also compatible with the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422. If you're interested in completing your flat towing setup, you're also going to need: -A wiring kit, Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7, -A charge line kit, Roadmaster Battery Charge Line Kit for Towed...
view full answer... - Parts Needed To Flat Tow 1987 Jeep Wrangler YJYes, we have all the parts needed to safely and legally flat tow your 1987 Jeep Wrangler YJ with manual transmission. First you need a base plate kit for your Jeep with a standard factory bumper (If you have the Off-Road Bumper with 1” D-Ringer Bumper Mounts, or Off-Road Bumper with 3/4” D-Ring Bumper Mounts, or Rugged Ridge XHD Bumper, just email me back for a updated recommendation.) The Roadmaster 1409-1 Crossbar-Style would be a good choice, but keep in mind this technical note:...
view full answer... - Parts Needed to Flat Tow 2016 Fusion Titanium Hybrid Without Adaptive Cruise ControlYes, we have all the parts and information you will need to safely and legally flat town your 2016 Ford Fusion Hybrid First you will need a vehicle specific base plate kit. For your Fusion Hybrid WITHOUT adaptive cruise control you can use the Roadmaster # RM-524434-5 kit. It is designed for use with motor-home-mounted tow bars, the direct-connect brackets are virtually invisible, easy to mount and remove, and they eliminate the need for a quick-disconnect crossbar on your tow bar. Installs...
view full answer... - Replacement Arms For Roadmaster Base Plates on 2010 Jeep Grand Cherokee & Rest of Flat Tow Set UpLet's start with the arms for the Roadmaster # 1427-3 or # 1427-1 base plates that fit a 2010 Jeep Grand Cherokee, and per Roadmaster "The replacement baseplate arms for this vehicle have changed over time. For Roadmaster to identify the correct replacement arms for your baseplate, complete and return the Baseplate Arm Order Form." The order form for the base plates is at this part number: - Roadmaster Replacement Arms for Base Plate Kits # RM-ARMS Along with the arms, you'll also need...
view full answer...
- Roadmaster Base Plate Fit on 2010 Jeep Wrangler JK With Factory BumperWe do have the correct fit for your 2010 Jeep Wrangler JK with the factory bumper, but the part you mentioned is not a fit for the stock bumper. I verified directly with Roadmaster that the correct base plate for your Jeep is the following: - Roadmaster Direct-Connect Base Plate Kit # RM-521448-5 This will be exactly what you need to add base plates to your '10 Wrangler with the factory bumper so you can flat tow it. Along with the base plates, there are a number of other parts you'll...
view full answer... - Base Plate Compatible with Jeep Cherokee Trailhawk Elite with Front Bumper SensorsRoadmaster base plate kit # RM-521451-5 is confirmed to fit both the Trailhawk and Trailhawk Elite versions of the 2019 Jeep Cherokee. I confirmed with Roadmaster that this base plate works fine with the Technology Group package with the front bumper sensors. For proper fit the vehicle must have factory tow hooks and must not have the Active Air Shutter feature. The other components you'll need to complete your flat towing setup include the tow bar, safety cables, a wiring/lighting solution,...
view full answer... - Recommended Flat Towing Components For A 2017 Jeep Wrangler Unlimited Willys WheelerTo flat tow a 2017 Jeep Wrangler Unlimited Willys Wheeler edition you would need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit # RM-521448-5. This baseplate is only designed to fit standard factory bumpers. If you have a different bumper we'll need to know what it is to see if any baseplates are confirmed to fit with it. Tow Bar: etrailer SD Non-Binding Tow Bar # e74ZR. This tow bar comes with safety cables bracketed to the arms so you won't have to worry...
view full answer... - Tow Bar Wiring for 2020 Ford RangerI believe what you are asking is in regards to tow bar wiring for your 2020 Ford Ranger. And for that what you will need is the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7. This includes the wiring for the tail lights and turn signals which you'll connect to the included socket; the kit also includes the 6-way to 7-way to plug right into your RV's 7-way. In regards to wiring for the battery, I checked with Roadmaster, and your 2020 Ranger does not drain...
view full answer... - What Tow Bar For Base Plates 2017 Nissan VersaThe Roadmaster EZ Base Plate Kit with removable arms, # 52347-1 you refer to is a confirmed fit for the 2011 Nissan Versa, all models no exceptions listed. However, according to the online version of owner's manual for 2017 Nissan Versa, if the vehicle has a manual transmission it can be flat-towed but if it has an automatic or continuous variable transmission (CVT), it must be towed using a tow dolly under the drive wheels. Please refer to your vehicle specific owners manual. This...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Zack K
Video by:
Kathleen M
Video by:
Shane H
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Rick G
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
3/3/2023
no issues after 10K miles super happy with this product