Customers compare AM3664-2516 to these similar products
Products Featured in this Video
Today we're taking a look at the replacement nylon cap for hitch balls. Now, this unit replaces the nylon cap for your two and 5/16-inch diameter greaseless hitch ball that came on your Andersten ball mount. The nylon cap keeps the trailer coupler from binding and kinking when it's connected to the hitch ball. So when your coupler's connected, this nylon design allows really smooth transition and… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Your leaf springs are already over the axles, so you have a couple of options. You can go with a lift kit or you can replace your axle hangers. The tandem axle lift kit that will work with your trailer is the Lippert Components Tandem Axle Lift…
view full answer...Thank you for the photo of your food service trailer. It is a bit hard to tell for sure but it appears you have 8-lug wheels of the conventional steel type. If you are looking for decorative center caps for these wheels you can refer to the linked…
view full answer...To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and…
view full answer...If you are referring to two white wires from the brake magnet that are coming from the rear of each electric brake assembly, then it would not matter which wire is connected to ground and which wire is used for the brake feed. The magnet that…
view full answer...I reached out to my contact at Andersen and he did say that the red funnel piece on your Ultimate Connection 5th Wheel Hitch #AM3200 is strictly for guidance purpose to ease the hookup process. It has no effect whatsoever as to the actual connection…
view full answer...In order to use the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs part #AM3200 on a 2018 Ram 2500 with RamBox you'll need the Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer…
view full answer...I spoke with my contact at Andersen and he informed me that the Ultimate 5th Wheel Adapter part #AM3200 that you referenced has three height settings now. One that is 15-3/4 inches, 16-11/16 inches, and 18 inches. I attached a picture that shows…
view full answer...You did not make a mistake at all by purchasing a 2018 Ram 2500 Laramie Longhorn 4x4. In fact, you made a great choice because based on my research your truck, with a Crew Cab, 6.7L Cummins engine, 6'4" bed and 3.42 axle ratio your towing…
view full answer...The Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AM3200 has 9 inches of offset so it can help short bed trucks make tight turns while towing a trailer. Here is the formula you would need to use to determine if that would be enough. (A…
view full answer...The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs #AM3200 is easy to use. The adapter with quick release allows you to easily connect and disconnect a 5th wheel trailer from your gooseneck. The built in funnel…
view full answer...Yes, the Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AM3200 does come the alignment ring. I attached a picture that shows it as well.
view full answer...We have what you need for your Andersen Ultimate Connection 5th Wheel Trailer Hitch System, #AM3200. That is the Andersen Ultimate Safety Chain Kit with Clevis Hooks, #RM3230. This should allow you to be compliant with California Towing Code #29003.…
view full answer...